Stealth Burner

A replacement to the Afterburner - https://github.com/VoronDesign/Voron-Afterburner/releases

AfterBurner

Afterburner is not specifically an extruder, but the collective name for the Voron direct-drive interchangeable tool head system. The Afterburner system has three interchangeable components: the extruder, the toolhead holding the hot end, and the cooling assembly. Each of those can be swapped without affecting the other components. - https://github.com/VoronDesign/Voron-Afterburner/releases 

Mini Afterburner

Mini Afterburner refers to the V0.1 toolhead with a built-in direct-drive extruder based on the Pocketwatch from the original Voron Zero.

Clockwork

Clockwork is the name given to the original extruder system for Afterburner. It is a repackaged BMG dual-gear extruder driven by a compact “pancake” NEMA17 motor. The Afterburner term is commonly (but incorrectly) used to refer to this extruder.

Pocketwatch

Pocketwatch is the Afterburner Clockwork repackaged for the smaller size needed by the Voron Zero printer. Pocketwatch is available as a standalone extruder for Bowden setups.

Galileo

Galileo is the newest extruder designed to fit on an Afterburner toolhead. It is based on the Orbiter extruder and incorporates a planetary gear reduction to allow a smaller housing size and even smaller motor to be used in order to reduce weight.

Klicky

https://github.com/jlas1/Klicky-Probe - Some replace the Panasonic probes that tend to fail with this instead to level your bed.

Nevermore

A carbon filter for your plastic fumes designed for Voron to be mounted at under the bed at the front of the printer. It also helps improve the chamber heat up time and if your chamber is well sealed will keep nasty fumes from getting out as they pass through this filter.
More info - https://github.com/nevermore3d/Nevermore_Micro